Book Appointment

 

Are you on the lookout for resources on How to Troubleshoot and Repair an Electric Water Heater?

Several modern houses utilize an electrical hot water heater for their heating unit, as a result of its ease as well as convenience of use. Nevertheless, much like any other electrical devices, problems may emerge with its usage, suddenly. It can be actually irritating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't warm sufficient and even too warm. Whatever the instance may be, hot water heater problems can be rather aggravating. Fortunately, we've made a checklist of possible services to your water heater issues. There are a number of factors that could create many of these issues, maybe a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for security. Whatever the trouble is, getting it repaired need to not position excessive of an issue if you comply with these steps:

 

Call A Professional:

If after changing all defective components and also resetting your temperature, the hot water heater still isn't working, you may require to call a specialist plumber for a specialist viewpoint. The trouble with your heater could be that the hot and cold taps have actually been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the instance might be, a professional plumber would certainly help resolve the issue.

 

Inspect Your Power Supply:

As fundamental as this may appear, it is extremely required. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water instantly retires is to verify that it isn't a power issue. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, merely transform it on and off again. Replace any damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's currently functioning.

 

Examine Your Thermostat:

If your water heater still isn't working or the water appearing isn't hot sufficient, you might require to inspect the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open up the access panel and press the red button for temperature level reset above the thermostat. This ought to help heat the water. Turn the circuit breaker back on as well as inspect if the problem has been solved.

 

Check the Burner in the Water Heater:

If it's not a power issue, then try taking a look at your burner if it is still functioning. Examine each of your heating elements to ensure the trouble isn't with any of them. If any one of them is faulty, replace that part and afterwards check whether the hot water is back on.

 

Conclusion

Hot water heater issues are not always significant. Many of them are because of minor concerns like a blown fuse or worn-out burner. Changing the defective parts need to work. Nonetheless, if you are still incapable to fix the trouble, give a call to your local plumber ahead to get it taken care of.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.

Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.

Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/

 

I am very taken with How to Troubleshoot and Repair an Electric Water Heater and I hope you liked our blog entry. Remember to take a moment to distribute this blog entry if you liked it. Thank-you for taking the time to read it.

Choose excellence in emergency plumbing.